Näytä suppeat kuvailutiedot

Parameterized AES-Based Crypto Processor for FPGAs

Plosila J.; Dytckov S.; Beltrame G.; Ebrahimi M.; Tenhunen H.; Daneshtalab M.; Anwar H

dc.contributor.authorPlosila J.
dc.contributor.authorDytckov S.
dc.contributor.authorBeltrame G.
dc.contributor.authorEbrahimi M.
dc.contributor.authorTenhunen H.
dc.contributor.authorDaneshtalab M.
dc.contributor.authorAnwar H
dc.date.accessioned2022-10-28T13:21:04Z
dc.date.available2022-10-28T13:21:04Z
dc.identifier.isbn978-1-4799-5793-4
dc.identifier.urihttps://www.utupub.fi/handle/10024/164551
dc.description.abstract<p> In this paper, we propose a parameterized crypto co-processor based on Advanced Encryption Standard (AES). This parameterized AES module is integrated into a 32-bit general purpose 5-stage pipelined MIPS processor. The integrated AES module is a fully pipelined which follows both inner and outer round pipeline design. The processor fetch an instruction from the instruction memory and sends it to the decode stage. The crypto instruction pushed into the AES module during the decode stage, however if the instructions belongs to the MIPS processor it completes the remaining cycles on the pipeline stages of the MIPS processor. The parameterized AES module can achieve different latencies on different rounds of AES according to the application requirements. The effects of different number of rounds on latency, memory, and area are studied and reported.</p>
dc.language.isoen
dc.titleParameterized AES-Based Crypto Processor for FPGAs
dc.identifier.urlhttp://ieeexplore.ieee.org/xpl/articleDetails.jsp?reload=true&arnumber=6927279
dc.identifier.urnURN:NBN:fi-fe2021042714093
dc.contributor.organizationfi=PÄÄT Tietoliikennetekniikka|en=PÄÄT Communication Systems|
dc.contributor.organizationfi=PÄÄT Ohjelmistotekniikka|en=PÄÄT Software Engineering|
dc.contributor.organizationfi=PÄÄT Sulautettu elektroniikka|en=PÄÄT Embedded Electronics|
dc.contributor.organization-code2606802
dc.contributor.organization-code2606801
dc.contributor.organization-code2606804
dc.converis.publication-id1357152
dc.converis.urlhttps://research.utu.fi/converis/portal/Publication/1357152
dc.format.pagerange472
dc.format.pagerange465
dc.okm.affiliatedauthorTenhunen, Hannu
dc.okm.affiliatedauthorEbrahimi, Masoumeh
dc.okm.affiliatedauthorDaneshtalab, Masoud
dc.okm.affiliatedauthorDytckov, Sergei
dc.okm.affiliatedauthorPlosila, Juha
dc.okm.discipline213 Sähkö-, automaatio- ja tietoliikennetekniikka, elektroniikkafi_FI
dc.okm.discipline213 Electronic, automation and communications engineering, electronicsen_GB
dc.okm.internationalcopublicationinternational co-publication
dc.okm.internationalityInternational publication
dc.okm.typeConference proceedings article
dc.relation.conferenceEuromicro conference on digital system design
dc.relation.doi10.1109/DSD.2014.90
dc.title.book2014 17th Euromicro Conference on Digital System Design, proceedings
dc.year.issued2014


Aineistoon kuuluvat tiedostot

Thumbnail

Aineisto kuuluu seuraaviin kokoelmiin

Näytä suppeat kuvailutiedot