Näytä suppeat kuvailutiedot

Energy-Efficient Formation Morphing for Collision Avoidance in a Swarm of Drones

Mohamed SAS; Tenhunen H; Haghbayan MH; Heikkonen J; Plosila J; Yasin MM; Yasin JN

dc.contributor.authorMohamed SAS
dc.contributor.authorTenhunen H
dc.contributor.authorHaghbayan MH
dc.contributor.authorHeikkonen J
dc.contributor.authorPlosila J
dc.contributor.authorYasin MM
dc.contributor.authorYasin JN
dc.date.accessioned2022-10-28T13:50:16Z
dc.date.available2022-10-28T13:50:16Z
dc.identifier.urihttps://www.utupub.fi/handle/10024/167739
dc.description.abstractTwo important aspects in dealing with autonomous navigation of a swarm of drones are collision avoidance mechanism and formation control strategy; a possible competition between these two modes of operation may have negative implications for success and efficiency of the mission. This issue is exacerbated in the case of distributed formation control in leader-follower based swarms of drones since nodes concurrently decide and act through individual observation of neighbouring nodes' states and actions. To dynamically handle this duality of control, a plan of action for multi-priority control is required. In this paper, we propose a method for formation-collision co-awareness by adapting the thin-plate splines algorithm to minimize deformation of the swarm's formation while avoiding obstacles. Furthermore, we use a non-rigid mapping function to reduce the lag caused by such maneuvers. Simulation results show that the proposed methodology maintains the desired formation very closely in the presence of obstacles, while the response time and overall energy efficiency of the swarm is significantly improved in comparison with the existing methods where collision avoidance and formation control are only loosely coupled. Another important result of using non-rigid mapping is that the slowing down effect of obstacles on the overall speed of the swarm is significantly reduced, making our approach especially suitable for time critical missions.
dc.language.isoen
dc.publisherIEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
dc.titleEnergy-Efficient Formation Morphing for Collision Avoidance in a Swarm of Drones
dc.identifier.urnURN:NBN:fi-fe2021042823787
dc.relation.volume8
dc.contributor.organizationfi=PÄÄT Sulautettu elektroniikka|en=PÄÄT Embedded Electronics|
dc.contributor.organizationfi=PÄÄT Tietojenkäsittelytiede|en=PÄÄT Computer Science|
dc.contributor.organizationfi=PÄÄT Ohjelmistotekniikka|en=PÄÄT Software Engineering|
dc.contributor.organization-code2606803
dc.contributor.organization-code2606802
dc.contributor.organization-code2606804
dc.converis.publication-id49961616
dc.converis.urlhttps://research.utu.fi/converis/portal/Publication/49961616
dc.format.pagerange170681
dc.format.pagerange170695
dc.identifier.eissn2169-3536
dc.identifier.jour-issn2169-3536
dc.okm.affiliatedauthorTenhunen, Hannu
dc.okm.affiliatedauthorPlosila, Juha
dc.okm.affiliatedauthorHaghbayan, Mohammadhashem
dc.okm.affiliatedauthorMohamed, Sherif
dc.okm.affiliatedauthorYasin, Jawad
dc.okm.affiliatedauthorHeikkonen, Jukka
dc.okm.discipline113 Tietojenkäsittely ja informaatiotieteetfi_FI
dc.okm.discipline213 Sähkö-, automaatio- ja tietoliikennetekniikka, elektroniikkafi_FI
dc.okm.discipline213 Electronic, automation and communications engineering, electronicsen_GB
dc.okm.discipline113 Computer and information sciencesen_GB
dc.okm.internationalcopublicationinternational co-publication
dc.okm.internationalityInternational publication
dc.okm.typeJournal article
dc.publisher.countryUnited Statesen_GB
dc.publisher.countryYhdysvallat (USA)fi_FI
dc.publisher.country-codeUS
dc.relation.doi10.1109/ACCESS.2020.3024953
dc.relation.ispartofjournalIEEE Access
dc.year.issued2020


Aineistoon kuuluvat tiedostot

Thumbnail

Aineisto kuuluu seuraaviin kokoelmiin

Näytä suppeat kuvailutiedot